Digital tank contents indicator Installed and Used After Delivery

Digital tank contents indicator Installed and Used After Delivery

The Digital tank contents indicator is a device that helps you check and manage the amount of oil remaining in the tank. There are many types of tanks including floating tanks, underground tanks, with many different volumes. Depending on the type of tank, you can choose different types of oil level sensors.
Knowing the need to control and manage the volume of oil remaining in the tank of hospital A, the Sales Department of Phat Dat Company contacted hospital A in Ho Chi Minh City.
The hospital's needs are as follows:
The hospital has a tank containing diesel oil.
Floating tank
Oil tank placed outdoors
Oil tank is about 2 meters high
Tan volume is 8.5 cubic meters, meaning the tank contains 8,500 liters of oil
Customers need to continuously monitor the amount of oil inside the tank
Display unit is liters or m3
Display electronic numbers, do not use electricity for safety reasons, explosion-proof
Equipment is of European origin

After discussing and surveying the hospital's oil tank, Phat Dat's sales department chose the Digital tank contents indicator model DIT 10, manufactured by AFRISO, imported by Phat Dat from Germany to Vietnam.

The DIT 10 level sensor can be used for both floating and underground tanks
The customer's oil tank is placed outdoors, so Phat Dat advises that this oil level sensor should be placed in an electrical cabinet to avoid rain and direct sunlight on the electronic display unit of liters.
This DIT 10 Digital tank contents indicator is applied to oil tanks up to 4 meters high, the customer's oil tank is 2 meters high.

The customer's tank volume is 8.5 cubic meters of Diesel oil. So this oil level sensor meets this requirement. Because this oil level sensor displays electronic numbers, there are 4 numbers.
The customer's requirement is to continuously monitor how many liters or m3 of oil is left inside the tank, because most oil tanks in Vietnam are of the type that cannot see the oil inside the tank. These types of tanks are not transparent. After the tank has been filled with oil. When the customer uses oil for activities in the hospital, such as using this oil to run a generator, or using this oil to run a boiler with an oil burner. When using oil, the amount of oil inside the tank will decrease. And when it decreases to a certain level or to the maximum, the customer will add oil to the tank again. Customers need to view and manage the amount of oil to choose the right time to supply oil to the tank. Therefore, the best choice is this DIT 10 oil level sensor.

Digital tank contents indicator displays liters or m3: if you set the DIT 10 to display unit m3, this level sensor can display a maximum value of 9999 m3 of oil. If you switch to the setting mode on the display face to liters, this oil level sensor will display an electronic number with a value of 9999 liters. Both cases meet the customer's requirements.

This DIT 10 Digital tank contents indicator has a battery power supply, battery life of 8 years, has a battery saving mode, after 3 minutes the display screen will automatically turn off, when you need to view, you just need to press the key on the clock face, the electronic number will display again. The power supply is battery, so it is safer than using 24VDC or 220 VAC power.

This DIT 10 Digital tank contents indicator is imported directly by Phat Dat from Germany

In the construction and installation of oil level monitoring equipment inside the tank, there is a difficulty that the tank already contains oil, so it will limit drilling, cutting, welding... into the tank wall. Due to labor safety issues, and if it is required to drill, weld, cut to connect additional mechanical accessories to serve the installation of oil level measuring equipment, all oil in the tank must be drained, the tank must be cleaned, and then drilling and welding can be done. Therefore, Phat Dat has advised customers on this type of DIT 10 Digital tank contents indicator.

The DIT 10 oil level sensor includes a sensor, a cable connecting the sensor to the electronic digital display. When installed in the oil tank, this sensor will be dropped from the top of the tank as shown. This pre-existing tank cover will have a vent hole for the tank and an additional location to install the oil level sensor. Thus, the difficult problem of installing the oil level sensor has been solved, without having to drill directly into the oil tank  .

DIT 10 Digital tank contents indicator

Digital tank contents indicator display 

Oil level sensor wiring diagram

Oil level sensor 

Installed digital tank contents indicator 

Why should you buy Digital tank contents indicator at Phat Dat Company?
When finding the need to buy Digital tank contents indicator from customers. The technical department will contact the customer to understand the technical requirements and applications of the customer, because each customer has different needs, no one is the same.

Then the sales staff will provide oil level measurement solutions for customers to choose from to suit their budget and application. Because Phat Dat provides many types of oil level sensors with average to high prices, customers can freely choose the product they like. The technical team will guide the installation, operation, and use of oil level sensors for free, 24/7.
Phat Dat will provide documents certifying the origin and quality of the Digital tank contents indicator upon delivery.
You can view the Digital tank contents indicator and buy it directly at Phat Dat Company's office. Address: 41F/96/18 Dang Thuy Tram Street, Binh Loi Trung Ward, HCM City.
If you live far away, Phat Dat can deliver the Oil Level Sensor by truck, FedEx...
You can contact Phat Dat Company's Hotline 24/7. Email: info@phatdatcompany.com.
Thank you for reading the article. If you have any questions, please do not hesitate to contact us.