Hot and cold water meter
APPLICATION
Water meters are assigned to industrial measurements of water usage up to 30 degrees of cold
water and up to 130 degrees of hot water in relatively regular and strong flaw rate. Construction
of the water meter gives possibility of mounting on horizontal, vertical and inclined water
supply systems with counter set upwards, sidewards or in medium position H-V. Optionally,
there is available version of water meter for demineralised water for DN40-150 (cold and hot
water) and with the input for pressure sensor (M14x1,5) for DN50-150.
ADVANTAGES
Permanent and efficient construction, ensuring the flow of water in low loss of pressure and easiness in assembly
in random waterworks installations.
Lowered weight of water meter.
Interchangeable and unified metering layer fitting to several sizes of body and assuring optimal water meter
management.
Standard water meter is suitable for remote readings in AMR system.
The possibility of mounting the water meter in the intermediate position without the influence on the metrologi-
cal parameters, larger possibilities in designing and modernizing new used water meters connections.
Very good anticorrosive and mechanical qualities of paint coat (powder paint- epoxy).
CHARACTERISTIC FEATURES
Resistant to the external magnetic field, according to EN14154-3
Low starting slow rate
Wide measuring range
Ease read-out due to a freely adjustable rotary counter dial placed in the casing
Possibility of electronic check-up of the metrological parameters of the water meter
Modular structure
Removable measuring insert in covered casing
Magnetic clutch
